10U Modular GPON OLT
- The SAN3700-10U is a high-density GPON OLT. It is fully compliant with ITU-T G.984.x & G.988 GPON standards and can interwork with different types of ONUs from different vendors. Based on the proven， the system is highly reliable and stable. The SAN3700-10U supports network management via CLI and SNMP, and the user interface is good and easy to operate.
- The SAN3700-10U has a frame structure of 10U height and 19-inch width, making it suitable to install on a 19-inch standard rack. The GPON line card has 8 or 16 PON ports. The system is able to hold 14 line cards, so the PON port number can reach up to 224.Each PON port supports up to 128 ONUs, so the system supports a maximum of 28,672 ONUs.
- The SAN3700-10U has 2 switch & control boards. Each board has 4 10GE uplink ports, and the boards work in 1+1 mode for backup. There are 2 uplink cards in the system, each providing 4 10GE Ethernet ports. Additionally, there are 2 power boards that also work in 1+1 mode for backup.
- The installation and commissioning of SAN3700-10U are easy, which minimizes the operators' investments. It is an excellent choice for service providers looking to deploy a GPON FTTH network.
Characteristic | Description |
|---|---|
Switching Capacity | ▸Bidirectional bandwidth of switch & control board is 1.12 Tbps ▸Bandwidth of backplane is 2Tbps |
Switch & Control | ▸2 boards, 1+1 backup ▸Each board has two out-band management ports, one ▸Console port, and four 10GE upstream ports. |
GPON Ports | ▸14 GPON line cards ▸Each card has a8 or16 GPON ports ▸Maximum 224 GPON ports in the system |
Uplink Port | ▸2 uplink boards ▸Each uplink board supports 4 X 10GE ports (SFP+) ▸Each switch & control board supports 4 X 10GE uplink ports ▸Maximum 16 X 10GE uplink ports in the system |
Power Supply | ▸1+1 DC power supply backup ▸Input voltage range: -40.5V～-72V |
Power Consumption | ▸Maximum: 1450W |
Chassis Dimensions (W x D x H) | ▸440mm x 248mm x 466mm ▸Chassis + bracket: 482*248*466 |
Environmental Parameters | ▸Operating temperature: -5°C～45°C
▸Storage temperature: -40°C～70°C ▸Relative humidity: 10%～90%(no condensation) |
Technical Specifications(1) PON Features
Characteristic | Description |
|---|---|
PON Features | ▸Compliance with ITU-T G.984x, G.988 and operator related standards. ▸Eeach PON port supports up to 128 GPON ONU ▸Support of 5 types bandwidth profile ▸Support of multiple ONU authentication mechanisms, such as LOID, SN, Password, and combined authentication. ▸Support of ONU information report ▸Support of ONU auto register (SN mode) ▸Support of ONU reverse query ▸Support of ONU auto configuration according to ONU type ▸Support of DBA ( Dynamic Bandwidth Allocation) ▸Support of ranging and logical distance configuration ▸Support of upstream and downstream FEC enabling/disabling ▸Support of AES encryption ▸Support of ONU service batch upgrade ▸Support of PON port-isolate ▸Support of configure ONU management IP ▸Support TR069 ▸Support of ONU UNI port MAC address filtering ▸Support ONU UNI port status checking ▸Support PON port and ONU RSSI related attributes alarm ▸Support ONU capability set query ▸Support SFU UNI port status query ▸Support ONU remote batch upgrade ▸Support of remote ONU loop detection ▸Support of ONU MAC-move alarm ▸Support Type-B PON protection ▸Support Port control for ONU with CATV interface ▸Support ONU QoS configuration ▸Support of rogue ONU detection ▸Support ONU traffic statistics while PM (Performance Management) disabled ▸Support ONU VoIP configuration via OMCI ▸Support default ONU-type configurable ▸Support of ONU WiFi configuration via OMCI ▸Support ONU WAN configuration via OMCI ▸Support ONU UNI ports loop detection ▸Support MAC limit based on ONU service-port |
(2) System functions
Technical Feature | Description |
|---|---|
System Functions | ▸Support fan speed automatic control and manual control
▸Support system-level temperature alarm threshold configurations
▸Support 1 +1 protection for control board
▸Support 1+1 protection for power
▸Support service board power-saving features |
(3) Ethernet Features
Technical Feature | Description |
|---|---|
VLAN | ▸Support 4K VLAN attributes ▸Support QinQ and flexible QinQ ▸Support VLAN additions, deletions, conversions, and transmissions |
Spanning Tree | ▸Support STP/RSTP |
Port Management | ▸Support bidirectional bandwidth control ▸Support static and LACP aggregation groups ▸Support aggregation groups, load balance based on MAC/IP ▸Support port mirrors and service mirrors ▸Support port SFP information reading ▸Support port RSSI configurable and alarm function ▸Support line card mirror ▸Support global configuration of LACP dynamic trunk |
Multicast | ▸Support IGMPv1 / v2 / v3 ▸Support IGMP Snooping / Proxy ▸Support MLDv1 ▸Support static multicast configuration ▸Support multicast VLAN spanning ▸Support multicast version globally control ▸Support multicast pre-configuration |
PPPoE | ▸Support PPPoE + based on VLAN |
(4) QoS function
Technical Feature | Description |
|---|---|
QoS | ▸Support bidirectional service traffic speed limit ▸Support downlink simple scheduling and hierarchical scheduling ▸Support QoS in-direction queue mapping ▸Support queue priority scheduling (SP / WRR / SP + WRR) ▸Support QoS for ONU uplink direction |
(5) L3 functions
Technical Feature | Description |
|---|---|
DHCP | ▸Support DHCP-Relay ▸Support DHCP-Snooping ▸Support DHCP-Option82 |
VLANIF | ▸Support the configuration of L3 interface address |
ARP | ▸Support Arp-agent function |
Route Management | ▸Support static routing ▸Support for default routing ▸Support OSPFv2 |
(6) Security Features
Technical Feature | Description |
|---|---|
User Security | ▸Support port and ONU isolation function ▸Support MAC filtering |
Equipment Security | ▸Support broadcast storm control ▸Support of Anti-DoS ▸Support user classification to prevent unauthorized users from illegal invasion ▸Support auto reboot under ultra high temperature ▸Support of SSH ▸Support of radius |
Network Security | ▸Support port broadcast / multicast packet suppression ▸Supports traffic classification and definition based on IP packet header information including source / destination MAC, VLAN, 802.1p, ToS, DiffServ, source / destination IP (IPv4 / IPv6), TCP / UDP port number, protocol type. ▸Support for L2-L7 ACL flow classification at packet depth of 80 bytes ▸Support business flow strategy, including mirroring, redirection, statistics, filtering ▸Support IP-source-guard function |
(7) Network Management
Technical Feature | Description |
|---|---|
Network Management | ▸Support the management based on serial port (serial) ▸Support the management based on the command line interface (CLI) ▸Support SNMP-based NMS network management |